【數顯溫度變送器】0.25級精度和0.45級精度區別/溫度變送器工作原理：一體化溫度變送器一般由測溫探頭（熱電偶或熱電阻傳感器）和兩線制固體電子單元組成。采用固體模塊形式將測溫探頭直接安裝在接線盒內，從而形成一體化的變送器。一體化溫度變送器一般分為熱電阻和熱電偶型兩種類型。

    在溫度變送器使用的過程中，不可避免的存在精度的困擾，華恒液位變送器廠家在處理眾多廠商在處理高溫或低溫介質時候，不可避免的需要面對處理液位自動化控制的同時處理溫度帶來的困擾，

    在設計液位類儀表使用時，溫度作為至關重要的一個參數，很多情況下影響到介質測量，在工業使用儀表的過程中都會存在一個誤差，根據而儀表準確度就是說bai明儀表指示值與被測量實際值之間的近似程度。

    我國工業儀表等級分為0.1，0.2，0.5，1.0，1.5，2.5，5.0七個等級，并標志在儀表刻度標尺或銘牌上，數字越小，說明精度等級越高，與實際值的偏差越小。作為工業級儀表應用，常規使用的1.0級使用比較多，作為液位測量和溫度檢測類儀表常用的精度為0.1；0.25；0.45，時常有很多水處理的廠商，會提到0.2級和0.5級時，很多科研機構，又提出0.25級和0.45級，這0.25和0.2級究竟有沒有去區別呢？

  【數顯溫度變送器】0.25級精度和0.45級精度區別/  在國內早期的關于儀表精度標識中，使用的0.1級，0.25級，0.45級，后來隨著對精度要求提高，逐漸演化為，0.075級，0.1級，0.2級，0.5級，精度等級是以它的允許誤差占表盤刻度值的百分?jǐn)?shù)來劃分的，其精度等級數越大允許誤差占表盤刻度極限值越大。量程越大，同樣精度等級的，它測得數值的絕對值允許誤差越大。

    熱電阻溫度變送器是由基準單元、R/V轉換單元、線性電路、反接保護、限流保護、V/I轉換單元等組成。測溫?zé)犭娮栊盘?hào)轉換放大后，再由線性電路對溫度與電阻的非線性關系進行補償，經V/I轉換電路后輸出一個與被測溫度成線性關系的4～20mA的恒流信號。

    在正常的使用條件下，bai儀表測量結果的準確du程度叫儀表的準確度。zhi引用誤差越小，儀表dao的準確度越高，而引用誤差與儀表的量程范圍有關，所以在使用同一準確度的儀表時，往往采取壓縮量程范圍，以減小測量誤差。

Working principle of temperature transmitter: The integrated temperature transmitter generally consists of a temperature probe (thermocouple or thermal resistance sensor) and a two-wire solid electronic unit. The temperature measuring probe is directly installed in the junction box in the form of a solid module to form an integrated transmitter. Integrated temperature transmitters are generally divided into two types: thermal resistance and thermocouple.

    In the process of using temperature transmitters, it is inevitable that there are problems with accuracy. Huaheng liquid level transmitter manufacturers inevitably need to face the automatic control of liquid level when dealing with many manufacturers dealing with high temperature or low temperature media. At the same time deal with the trouble caused by temperature,

    When designing the use of liquid level meters, temperature is a crucial parameter, which affects the medium measurement in many cases. There will be an error in the process of industrial use of the meter. According to the accuracy of the meter, the indicator value of the meter The degree of similarity with the actual value being measured.

    Our country’s industrial instrument grades are divided into seven grades: 0.1, 0.2, 0.5, 1.0, 1.5, 2.5, 5.0, and are marked on the meter scale or nameplate. The smaller the number, the higher the accuracy grade and the smaller the deviation from the actual value. . As an industrial-grade instrument application, the conventionally used 1.0 level is more commonly used. As a liquid level measurement and temperature detection instrument, the commonly used accuracy is 0.1; 0.25; 0.45. There are often many water treatment manufacturers, and they will mention the 0.2 and 0.5 levels. At that time, many scientific research institutions also proposed 0.25 and 0.45. Is there any difference between 0.25 and 0.2?

    In the early domestic identification of instrument accuracy, 0.1, 0.25, and 0.45 were used. Later, with the improvement of accuracy requirements, it gradually evolved to 0.075, 0.1, 0.2, and 0.5. The accuracy level is based on it. The allowable error accounts for the percentage of the dial scale value. The larger the accuracy level, the larger the allowable error accounts for the dial scale limit value. The larger the range, the greater the allowable error of the absolute value of the measured value for the same accuracy level.

    Thermal resistance temperature transmitter is composed of reference unit, R/V conversion unit, linear circuit, reverse connection protection, current limiting protection, V/I conversion unit and so on. After the temperature measurement thermal resistance signal is converted and amplified, the linear circuit compensates for the nonlinear relationship between temperature and resistance. After the V/I conversion circuit, a 4-20mA constant current signal with a linear relationship with the measured temperature is output.

    Under normal conditions of use, the accuracy of the measurement result of the bai meter is called the accuracy of the meter. The smaller the zhi reference error, the higher the accuracy of the meter dao, and the reference error is related to the range of the meter, so when using the same accuracy meter, the range range is often compressed to reduce the measurement error.

華恒變送器廠家研發出傳感器和智能電路板兩項核心技術，不僅所有產品的核心部件技術全部掌握，工業自動變送器廠家的精確度也在不斷提高，由0.2級提高到0.1級。還可通過對所掌握核心技術進行延伸，變形出測流量、測溫度的其他產品。

        我們公司目前擁有三大技術實力，一是全隔離的智能電路處理單元技術，二是金屬電容傳感器的制造技術，三是全系列節流裝置的多參量技術。
        華恒變送器廠家憑借自身?yè)碛械膫鞲衅骱椭悄茈娐钒搴诵募夹g(shù)，可以根據客戶要求，低成本對核心技術進行延伸變形，實現個性化產品定制。主要產品有SMART（斯瑪特）系列壓力變送器、多參數變送器、流量器、溫度傳感器和物位（液位變送器廠家，為我國電力、石油、化工、冶金、水泥、礦業等行業提供了高性能價格比的工業自動變送器廠家產品.